ROMPOX FLEX JOINT

TWO COMPONENT PAVING JOINTING MORTAR

For Light to Medium Traffic Loads

The Viscous Elastic Paving Jointing Mortar

Rompox Flex Joint
  • For Light to Medium Traffic Loads
  • For Unbonded Construction Methods
  • For Joint Widths from 5 mm (3/16")
  • For Joint Depths from 30 mm (1 3/16").
  • Highly Water Permeable
  • Self Compacting
  • Water Emulsifiable
  • No Need to Cover Surface During Drizzle
  • Can be Applied at Surface Temperatures of > 7°C (> 44.6°F)
FEATURES
ROMPOX FLEX JOINT GALLERY

EASY HOW-TO-APPLY INSTRUCTIONS
rompox easy pre wet
1. Pre-Wet

Pre-wet the surface. Porous surfaces as well as higher surface temperatures, require more intense pre-wetting.

rompox draIn plus mix
2. Mix

Open the bucket, open bottles within and pour the contents slowly and completely into the filler material component. Start the mixing process. DO NOT add water! Total mixing time: at least 6 minutes.

rompox d2000 wash in 1
3. Apply

Apply the mixed paving jointing mortar onto the well damp surface and work it carefully into the joints using a squeegee/rubber slider. In order to use the optimum flow capacity of the paving jointing mortar, it is poured onto 3 to 4 areas of the jointing area.

rompox drain plus final cleaning
4. Final Clean

After approx. 10-15 minutes (at 20°C | 68°F surface temperature ) the excess mortar on the surface of the stones can be swept off carefully with a large, coarse broom. Then use a soft, hair broom to do a final cleaning until all residual mortar has been removed from the surface. The correct moment for sweeping, is when white smears no longer form on the stone surface during sweeping. Sweeping should be done diagonally to the joint. Do not re-use swept off material.

LEARN MORE
WordPress Theme built by Shufflehound. © 2018 ROMEX Canada West | All rights reserved
CustomerTools
WheretoBuy?
AskQuestion